The urban gardener asked:

Grow Light Reflectors

Often neglected as to their importance, grow light reflectors play a major role in a good indoor hydroponic garden system. Light plays a great role or the most important role in photosynthesis. The use of grow light reflectors in your garden enhances light distribution and ensures uniform distribution. Discounts on quality grow light reflectors are easily available and a super cost effective way of improving your personal garden productivity and efficiency. With effective planning, the use of the right lighting system together with grow light reflectors greatly expands your garden area.

Size and shape are important factors when considering the right grow light reflector. Grow lights and their configuration and personal preference for the amount of light needed to grow your plants are taken into consideration. Horizontal placement of the lights and reflectors are effective ways of mounting this system. Garden size also determines what shape and size of grow light reflector to be used. Smaller grow light reflectors produce higher intensity light beams because of their shorter travel distance.

Air-Cooled Reflectors

For additional ventilation and heat control, air-cooled reflectors are used. Indispensable for those gardens cramped in small spaces because of the amount of heat generated by grow lights. It maybe difficult or close to impossible to maintain proper ventilation in such enclosed garden by the use of external fans. Usual setup for indoor hydroponic gardens includes grow lights with air-cooled reflective hoods covered by glass heat shields. This allows the light source to be placed closer to the plant canopy ensuring better light ***********. Gardens with no special cooling requirements also gains to benefit from its installation. This is the ideal setup of an indoor hydroponic garden system; investing a little more provides maximum garden performance and enjoyment for gardeners and hobbyists.

The urban gardener asked:


The most widely-spread growing medium is, perhaps, rockwool. Originally used for insulation purposes and also known as mineral insulation, rockwool was first used as growing medium by Dane gardeners. Now, it is frequently used for drip-style indoor gardens around the globe.

Rockwool is produced by a process similar to making cotton candy: a particular mixture of sand and rock is melted and then turned into fibers by spinning the mixture to form products of multiple shapes and dimensions, from 1″ starter cubes and up to large slabs of  3″x12″x36″ in size. The variety of available forms and sizes turns rockwool into one of the most widely-used growing mediums.

Key advantages, as well as disadvantages, of this popular growing medium are listed below.

Rockwool’s Strong Points

HOLDING WATeR – rockwool as a growing medium in hydroponics systems is capable of holding a large amount of water. This creates an additional protection for situations, when water is not supplied because of power outages or failures in pumping or other gardening equipment.

ACCUMULATING AIR – up to 18 % of air are constantly kept by rockwool. Due to this capability, there is a very little risk to over water rockwool; besides, the plants are always supplied with enough amount of oxygen.

MULTIPLE SHAPES AND SIZES AVAILABLE – whether it is a small 1″ cube for seeds propagation or a large 3x12x36 inches slab for huge plant, rockwool offers a wide variety of shapes and sizes to choose from. Besides, loose rockwool is also available, designed for filling different plant containers.

NO DUST AND EASY TO USE – since rockwool maintains its form almost perfectly, it cannot be scattered accidentally. Besides, usually packed into plastic rockwool is a very clean material that is easy and comfortable to work with.

Rockwool’s Weak Points

NOT A “GREEN” MATERIAL – rockwool is claimed to be not environment-friendly material, because of its almost indefinite time of breakdown.

HEALTH HAZARDS – rockwool particles and fibers pose serious health danger, especially for human lungs. That is why it is necessary to wear a protective dust mask, while working with rockwoll.

pH PROBLEMS – because of rockwool’s high pH level, it is necessary to balance pH level in the nutrient solution properly and make it suitable for the plants, you are growing. In general, the use of rockwool requires more routine work to keep pH level of your nutrient solution at steady level.

LONG PRE-SOAK PERIOD – before rockwool can be used in the hydroponic system, it should be soaked for at least 24 hours beforehand. Other growing media usually do not require pre-soaking, it is enough just to well-water them.

The urban gardener asked:


Carbon Dioxide (CO2) Systems

Carbon Dioxide (CO2) as described in the previous paragraphs is one of the most important elements needed for plant growth. CO2 is combined with nutrients, water and energy from light (grow lights/ sunlight) is utilized during photosynthesis producing essential sugars that provide energy for the plant. Any factor missing needed for photosynthesis will limit the plants growth potential. In order for a plant to grow to its utmost potential and for it to yield the best results all of the elements must be present. 

Carbon Dioxide (CO2) Injectors

One of the most cost effective way of adding CO2 to an indoor hydroponic garden system is with the use of CO2 injectors. A valve, regulator and gauge are used to measure CO2 levels injected to the air. Sophisticated CO2 injectors are also used to control CO2 release. CO2 tanks are readily available from medical supply outlets and restaurant supply stores.

Carbon Dioxide (CO2) Generators

Investing in CO2 generators would also be wise for long time use in your indoor hydroponic garden systems for several crops. CO2 generators burn propane, natural gas or other carbon based fuels to produce carbon dioxide. More expensive than CO2 tanks, they provide a more convenient way of producing CO2. Long period and continuous use of CO2 generators has proven to be more efficient and economical than purchasing injectors and many tanks.

Carbon Dioxide (CO2) Monitors and Controllers

CO2 monitors with controllers automatically maintain indoor hydroponic garden systems CO2 levels. It is advised for large-scale gardeners or hobbyists and enthusiasts with that extra cash to invest. Often in the hundreds of dollars, they are quite expensive but are really effective if you can afford it. An electronic CO2 monitor together with a CO2 controller are used to maintain CO2 levels. Monitors could be sold separately and can be used with various types of controllers giving room for flexible indoor hydroponic garden designs. 

Water

Water quantity requirements vary according to the type of indoor hydroponic garden system. Adequate levels of water should be maintained whatever type of indoor hydroponic garden system used. Water deficiency even if reversed and corrected cause permanent loss in production.

Not only the amount of water but also quality of water is important. Poor quality also causes serious problems for any indoor hydroponic garden system. The use of tap water can affect the nutrient balance in hydroponic nutrients solutions. Tap water naturally contains mineral and salts. Often referred to as “hard water,” tap water is offset by constant monitoring and adjusting nutrient solution. Salt content should always be kept below 325 ppm (parts per million) whenever possible.

Temperature

 

Temperature is a gauge for optimum production for every plant. When plants are exposed to extreme ranges of temperature, stunted growth and poor fruit yields are the result. Plants have specific temperature ranges for their ideal growth. Warm-season vegetables and most types of flowers have 18o C and 260 C as an ideal temperature range. Cooler season vegetables like lettuces have a 10o C to 18o C range.

The urban gardener asked:


Soil less Mixtures

There is a great amount of soil less mixtures available, which contain different ingredients. Sphagnum moss, perlite, and vermiculite are the most widely spread hydroponics components, used in such mixtures.

Being organic, soil less growing media are usually used for container gardening wick systems or on-recovery drip systems. It is also possible to use soil less mixtures in recovery systems, however, it is necessary to remember that because of very fine particles in such mixtures, they can clog tubes, pumps and drip emitters, when used without a good filtration system. By the way, according to the urban gardeners, one can use panty hose as a filter: just fit it to the return line and to the pump inlet, and all the tiny particles will be filtered out.

Most soil less mixes form a good growing medium for multiple hydroponic and organic gardens, because they can hold water well, have great wicking action, and, at the same time, they provide a reasonable amount of air to the roots of growing plants.

 

Coconut Fiber

The popularity of coconut fiber as growing medium increases rapidly around the world. Being the first totally organic growing medium, providing highest performance for hydroponic systems, coconut fiber may soon become the most popular growing medium ever. It is interesting to note that coconut fiber is, actually, a waste product, which contains the powdered husks of coconuts.

In comparison to rockwool, coconut fiber is characterized with higher oxygen capacity and water retaining. These features are important advantages for hydroponic systems with intermittent watering cycles.

Coconut fiber also contains a lot of root stimulating hormones, thus offering some protection against fungus infestation and other root diseases. The mixture of 50% coconut fiber and 50% expanded clay pellets is considered to be the perfect growing medium.

However, it is necessary to underline one precaution when buying coconut fiber. Avoid purchasing a low grade coconut fiber, which is very fine grained and contains a high level of sea-salts. Such coconut fiber will have negative and disappointing effect on hydroponic system.

The urban gardener asked:


Complete freedom from environmental factors gives indoor hydroponic gardening its ultimate advantage. All the elements needed for optimum plant growth are provided by the indoor hydroponic gardening system. Light, temperature, pH, CO2 and Oxygen are important factors that should be considered in planning your indoor hydroponic garden system.

 Light and Photosynthesis

 Essential sugars are created by plants through photosynthesis which is the process of converting carbon dioxide, water and nutrients into energy. Light is considered the most important factor because it provides energy for this chemical reaction. Studies show that an increase in light intensity directly increases the amount of sugar produced. This steadily goes up till the saturation point for light is reached by the plant. Increasing the level of light received by the plant should also be considered. Normally, a plant receives around 8-12 hours of sunlight in a day depending on the season. Plant exposure to this amount of light received in a day should be maintained in an indoor hydroponic garden system. Spacing is also important, be sure that they don’t block the light and ensure all plants received equal amount of light.

Plants not receiving enough grow light will have lasting negative effects on its growth even when corrected. Some characteristics are stems which are spindly and elongated leaving them ineffective in supporting plant growth. A decrease in the amount and size of the leaves is also one problem. More damaging effects of improper lighting are a decrease or absence of fruits, decreased overall quality and a change into a yellowish pigmentation for the plant.

Carbon Dioxide also plays a major role in Photosynthesis. Plants utilize the CO2 present in the atmosphere than anything else. CO2 systems are available which increase the levels of CO2 in your indoor hydroponic garden system

Good ventilation should also be considered as they maintain temperature and a steady fresh supply of CO2 and oxygen at all times. Complex setups require more complicated ventilation systems but an oscillating fan set on the same timer as the lights would ensure airflow that eventually allows for optimal plant nutrients in an hydroponic system.

The urban gardener asked:


These are the materials that mimic the soil in everyday gardens. It serves as a support system for your hydroponic indoor garden. They function mainly for anchoring the roots and a reservoir for water and nutrient solutions. Special attention is also placed on aeration or proper plant respiration and drainage. A balance must be kept between keeping the plant nourished and over saturating the roots.

 Types of Growing Mediums

 Choice of a specific growing medium mainly depends on the type of growing system to be used. Certain systems have no mediums used because plant growth is best when roots are suspended in air or water. Improvement made with newer growing medium mixtures has been introduced for optimum plant growth in certain systems. Ideally, an equal mixture of water and air is advised making it available for the roots to utilize at all times. Water by gravity always moves downward through coarse mediums only to be deposited in the bottom of the container. This is eliminated with the use of a hydroponic system as water is constantly circulated in the system. The only system that this would not work would be the Ebb and Flow Systems.

 Clay Pebbles

Recyclables, it can be constantly reused indefinitely reducing upkeep costs for your indoor garden. Size of the pot is one limiting factor as they do not possess good nutrient lifting ability, but effectiveness is enhanced in smaller pots and containers. Another advantage would be their neutral pH and they don’t retain nutrients. Ventilation and aeration are also maximized because of the spaces created between pebbles.

 

Clay pebbles are usually used together with net pots in drain and flood indoor hydroponic gardening systems. Water flow in roots is enhanced by their natural shapes and spaces hey create between them, therefore maximizing the absorption of nutrients. When using the Drip irrigation hydroponic system, use absorbent mediums to provide better retention and nutrient circulation.

 Coconut Fiber

Shredded husks of coconuts as a growing medium has also been growing in popularity. Packaged in a variety of ways like blocks, pellets, cubes and shredded fiber it can be a good substitute for any type of growing medium. It is also commonly mixed with other growing media such as perlite or rockwool.

 Why Use Coconut Fiber as a Growing Medium?

 Coconut fiber is actually a waste product; its ability to be used for other useful means takes a great step towards recycling and environmental awareness. It is the first totally organic medium which could be utilized for indoor hydroponic gardening. It is superior to rockwool in water handling ability and oxygen capacity. Coconut fibers also possess root stimulating hormones and prevent root disease and fungus infection. In its natural state, coconut fibers provide a good and rich medium for the coconut when it lands in the ground.      

Special attention should be given as to the quality of the coconut fiber to be purchased. Low grade quality is not well suited for gardening as they contain high sea salt content and fine grain texture. 

Perlite

Originally used as an additive to aide aeration and improve soil drainage, it has become one of the popular hydroponic growing mediums. Commonly used with a 50/50 mix with vermiculite, it is derived from volcanic glass with holes throughout produced by exposing it to high temperatures created by water bubbles.

 Advantages of Growing with Perlite

 Inexpensive and readily available is one of the causes of its popularity. Used in wick type hydroponic systems because of its aerate nature thereby giving a good wicking action.

 Disadvantages of Growing with Perlite

 Health hazards come with the use of perlite when inhaled, a mask is suggested when working with perlite as a growing medium. A high degree of care and maintenance is also required. Water retention is one of its weakness therefore constant watering is required.

 Vermiculite

Used in conjunction with another growing medium compliments the qualities of the other. A popular and common mix is that with perlite. In a 50/50 mix vermiculites property which is water retention (200 – 300% of its weight in water) complements perlites very porous quality and a balance is achieved.

 Dangers of Using Vermiculite

 Vermiculite can be a health hazard if not handled properly. Due to its nature of containing small amounts of asbestos, it can be very dangerous when inhaled. It easily dries on an individuals fingers when touched even when wet. It is not also practical to reuse because of the rinsing and drying required. Water retention is also a problem, because of its high water retention if not used in pair with another growing medium, root damage is likely and plant death are the result.

 Rockwool

Rockwool specifically made for indoor hydroponic gardening systems. It has remained as one of the popular growing mediums. Transplanting plants when grow too big from their previous containers is also eliminated. When this happens the existing cube with the plant is merely placed on top of a larger cube and the roots would grow through both cubes. Water retention qualities of rockwool is 10 times greater that of water. Its porous nature makes it virtually impossible to over water. Recyclable, it can be used for the next crop by merely rinsing, making it economical and environment friendly.

 Disadvantages of rockwool

 A natural pH found in rockwool is one of its disadvantages, pre-treatment is required before it is used as a growing medium. Methods of lowering its alkaline content includes mixing it with a solution of pH down, trace mineral solutions and a 24 hour fish emulsion and is then rinsed thoroughly. Gloves should be used when handling rockwool because of skin irritation but is not when rockwool is wet.

The urban gardener asked:


Fluorescent Grow Light

 Inexpensive and readily available in hardware stores and be utilized with regular light sockets. Producing less heat or none at all compared to full-size fluorescent grow lights.

Not just because of its small size and low heat output; compact fluorescent lights also produce the widest range of color spectrums to any type of lighting. It is ideal for shelf gardening due to their low heat output making the use of multiple shelves on top of each other possible. Compact fluorescent lights can be used with seedlings and small plants in a well designed hydroponic system indoor garden.

 Common Problems with Compact Fluorescent Light Bulbs

 Problems with compact fluorescent light bulbs like inefficiency and poor light *********** are common.  Several compact fluorescent bulbs maybe used and consume energy as that of one HPS bulb, but do not produce the same useable light for the hydroponic indoor garden. 

Optimizing Fluorescent Grow Lights

 With the disadvantages of comparative inefficiency compared to HID lights, several things maybe done to counteract this.

Properly matching lights to the corresponding growth cycle.

Increasing Watt ratings increases light penetration

One cheap and easy way to maximize energy consumption is by the use of reflectors. Compact fluorescent lights have a 360 degree of distribution but only 90 degrees of it can be practically used. Reflectors direct the light to corners in order to maximize the light produced.

 High Intensity Discharge Lighting

 HID light bulbs are the most after lighting system by both hobbyist and professional growers. It has made possible all-year, all-season planting for thousands of indoor gardeners and industrial nursery growers. Due to their efficiency ( 10x more light produced than conventional incandescent bulbs) and color spectrums ideal for plants have resulted to better yields and plant quality all year round. Metal Halide (MH) light bulbs mainly produce blue lights, making them ideal for plants undergoing the vegetative phase of development.

Industrial cultivators the world over are the main users of HID grow lights. HID lamps provide numerous advantages that conventional Fluorescent and incandescent lights lack. Monetary benefits abound, it boosts overall plant production giving better harvests, and environmental factors are eliminated allowing all year-round production. HID lights operate stock 110 to 220 volts AC home currents and have a standard three prong adapter to link up. HID grow lights mostly come with a ballast resistor and reflective hood.

Photosynshesis in plants allows plants them to produce their own energy. Chlorophyll in plants enables plants to convert CO2, water and energy from light to nutrients and sugars. When all this elements like CO2 and nutrients are readily and plenty in a desired surrounding, the potential for growth is bound only to the amount and quality of light available.

 High Pressure Sodium (HPS) light bulbs produce reddish light, it is ideal during the fruit phase of the plant cycle. Cooler (blue) and Warmer (orange) color spectrums raise chlorophyll production and fruit energy. The sun produces cooler lights when it is higher in the skyline, seen in the summer calendar months. It is essential for plant growth shape and keep it tight. Warmer light, experienced when the sun is lower in relative position to the skyline is important for blooming plants and during the fruit phase.

Choice of lights can also depend on the type of plants grown. Metal Halide growth lights are ideal for bushy harvests such as cabbage and vegetating herbaceous plants. Blossoming plants on the other hand is better suited by high pressure sodium growth lights. Conversion light bulbs are also available for different organizations. More expensive than other lights, conversion lamps give that extra advantage of starting your plants with a metal halide growth light giving taut, small development and being replaced by high pressure sodium light bulbs when the fruit stage of the plant is reached. Recent developments have introduced convertible ballast resistors for regular metal halide growth lights and high pressure sodium light bulbs.

HID grow lights main advantage is that it eliminates such factors as climate, temperature and time of day. Season dependent plants can be grown throughout the year; they provide an alternative to solar light. For those who are garden and flower hobbyists, this would be a plus.

Hydroponic growth lights also gives you control over light exposure. Allowing us to hasten a plants growth or that flower to bloom. Ideal light color, duration and concentration are the key factors in growing those choice plants.

 High Pressure Sodium Bulbs 

A clear ceramic arc tube suspended inside a glass bulb characterizes High Pressure Sodium Bulbs. Xenon gas is the main component inside the inner tube which is then ignited to produce an arc of light. Sizes range fro 35 watts up to 1000 watts. The most popular of which are the 250 watts, 400 watts and 1000 watts.

 Advantages of High Pressure Sodium Bulbs

 Efficiency is one of its advantages; they provide the best light *********** and have strong light spectrums necessary for plant growth. Mainly producing red and yellow lights or little or no blue lights, they mimic the autumn sun. Popularity for HPS lights are mainly attributed to their low energy to light ratio and is the most economical and efficient than any other type of lighting system. HPS lights work best during the flowering or fruit stage of the plant growth cycle.

 Disadvantages of HPS High Pressure Sodium Bulbs

 High Pressure Sodium Bulbs produce great amounts of heat. Proper ventilation and good garden construction and planning help to offset this negative effect. Like all HID growth light systems price is the main drawback compared to fluorescent lights. HPS lights are currently more cost effective compared to other HID growth light systems.

High Pressure Sodium Light bulbs are replaced after 24 months to ensure their and your gardens efficiency.

 Metal Halide Bulbs

 Metal Halide bulbs are constructed by placing an inner arc tube inside vacuum-sealed glass tubing. Electric currents passed through the inner arc which in turn ignites mercury and iodide materials in the tube.

 Advantages of Metal Halide Bulbs

 Metal Halide Bulbs mimic sunlight during summertime. Producing a blue spectrum of light most ideal for plants in their vegetative growth phase. They are also a good choice for indoor hydroponic garden systems because of their efficiency in producing light.

 Other Metal Halide Bulb Information

 Available from 70 to 1500 watts, Metal Halide bulbs present a wide variety of choices. Most popular and commonly used are the 250, 400 and 1000 watts metal halide bulbs. Ballast specifically tailored for each bulb is also essential. Mounting positions depend on its specific bulb type (marks or guides are usually provided). HOR bulbs are mounted horizontally, BU/BD is vertically mounted and U (universal) bulbs could be mounted either way. The vertical position is the most ideal and provides utmost efficiency.

 

The urban gardener asked:


A great indoor garden requires a good grow light. It could mean the difference between success and failure. Having the right hydroponic light is the single-most important and costly decision in setting up your garden.

 Hydroponic grow lights come in three main types:

 

Incandescent lights

These are the usual lights found in homes. They are generally a poor choice for garden grown lights because of their limited light spectrum and inefficiency.

HID (High Intensity Discharge) grow lights

Producing more light (up to 10x more lumens/watt than an incandescent light),are more efficient. Drawbacks would be, they produce more heat, generally more expensive than incandescent lights and requires the additional expense and maintenance with ballast. It takes around 100 hours before hydroponic HID grow lights reach their optimum working conditions, or until they reach light intensity and color stability. 

Natural Sunlight

Expense for acquiring artificial lights can be skipped by using sunlight. This is done with the use of solar room, greenhouse or large windows which allows plenty of sunlight. Or you can do this outdoors; hydroponics does not necessarily mean the cultivation of plants indoors but it growing plants without the use of soil.

Basic setup for an indoor garden is 1000w of lighting for and area of 16-25 square feet of plant area. Reflectors and/or light movers should also be considered as they improve efficiency of the indoor hydroponic gardening system. Ballast may also be needed as numerous hydroponic grow lighting require igniting.

 Some Basic Facts

Before plugging in your grow light

Different plants require different levels or types of lighting, this paragraph would deal on some simple know-how on how to make an effective lighting setup. In setting up your garden, it is essential that you determine your growing area in order to determine the best lighting setup for you. Light is an essential factor in the growth of plants, it is important that the lighting solution you chose for your garden is adequate for its size. A poor or ill advised decision would certainly reflect on the quality of plants you produced. Inappropriate budgeting like cost cutting specially on lighting would just prove to be uneconomical and inefficient in the long run.

A general rule for lighting that area coverage is determined by a light wattage output. Reflectors might be used to increase the light area and reach corners but effectiveness is still determined by this formula.

Day and Night Cycles

The type of plant and its stage of growth generally determine the amount of light needed. A common cycle is that with 18 hours of light and 6 hours of darkness which is recommended for its vegetative growth phase.

For seedlings, a continuous light source is needed until the first real leaves appear. When the leaves appear, the regular 18/6 light cycle is used. Fluorescent or incandescent lights are best for seedling because of the low heat and soft light they generate. Automated timers maybe used to ensure consistent light cycles. Inexpensive timers are also available; this can be found any hardware or Home Depot/ Lowe’s type store.

Light and Photosynthesis

The plants exposure to light intensity, duration and light color directly affects the amount of energy needed for photosynthesis. The color of the light, Blue simulates the summer sun, Orange for autumn seem to stimulate photosynthesis best. The light spectrum produced by metal halide bulbs (Blue lights) and high pressure sodium bulbs (red/ orange lights) produce this effects. HID grow lights produce these effects owing to their popularity to hobbyist and professionals. Combination of metal halide and high pressure sodium bulbs provides the complete spectrum of light produced by the sun.

Use Caution When Working with Lights

The combination of water, electricity and chemicals in such a closed-in space makes the grow room one of the most dangerous places in your house. Keep in mind to separate your ballast by elevating it from the water-containing areas of your hydroponic growing system. 

The urban gardener asked:


Ebb and Flow hydroponic systems or reservoir systems are one of the easiest to build and maintain. Simplicity and low cost in setting up make it ideal for home hobbyists. Basic setup consists of a growing tray for plants in containers. Usually used with pebbles, perlite and rockwool gardening mediums. Reservoirs filled with water and hydroponic nutrient solutions are placed under the growing medium. A timer controls the amount of water pumped back into the growing tray. The draining action helps provide a steady flow of oxygen to the plants roots. An overflow drain is installed to regulate water height and avoid overflow.

 

 

Building Ebb and Flow Hydroponic System

 

 

 

The following hydroponic supplies are required for an Ebb and Flow hydroponic system

 

 

 

Growing Tray

 

 

 

Root protection requires a growing light that shields your roots from light. Plastics are preferred to metals and wood due to its light weight and durability. A thorough check of the growing medium is required to make sure that water drainage is complete. Root rot, pests problems and molds are the main problems encountered by improper drainage.

 

Plant Pots

Any non-metallic plant pot with drainage holes will suffice for a simple ebb and flow system.

 

 

Growing Medium

 

Ebb and flow systems need no special type of growing medium. Clay pebbles (sometimes called grow rocks) are usually used, they don’t need to be mixed with other mediums. Due to frequent flooding cycles, it is advised that water retention be avoided.

Supports

Support for the tray suspended above the reservoir is needed. The setup of the indoor system would dictate if a simple table or milk tray, or a customized support is required. Something sturdy is what you need for supporting the full weight of your setup. Always include the weight of the water and nutrients in planning. Taking note the mature size and weight of the plants should also be considered. Changing the supports would present an impossible if not very difficult scenario once the plants reach their full growth size.

 

 

Reservoir

 

Any large plastic can be used as a reservoir (rubber tubs and trash cans are also ideal). Rust is the main problem with metal containers.

 

 

Drains

 

Two drains are required for your garden, a drain for the water to return to the reservoir and one for the overflow drain. Fill pipes also serve as a drain pipe, allowing it to run up the same way it came down. Overflow pipes should be designed at the desired maximum level of water for the indoor hydroponic garden system. Be sure that the overflow pipe is large enough to accommodate the amount of water to be pumped out of your grow space. Ideally a figure of 125% to 135% of the amount is desired. This assures a optimum flow of nutrients for the growing medium and avoids salt and mineral to buildup.

 

 

Water Pump

 

Pump size depends on the indoor hydroponic systems needs. The amount of water and distance are factors to be considered for the size of the pumps. Aquarium pumps can be used for most small scale systems.

 

 

Timers

 

The type and cost of timers depends on the specific setup of your gardens need. Hobbyists usually employing a single time schedule can work with a cheap timer readily available at a Home Depot or Lowe’s type store. Larger more sophisticated timers are needed for advance or large scale ebb and flow systems this allows control for more than one section at a time.

 

 

Flexible Plastic Tubing

 

Transparent flexible tubing’s should be avoided to prevent algae build up. Ordinary flexible tubing’s may also be used. 

 

 

Care of Ebb and Flow Hydroponic Systems or reservoir systems are one of the easiest to build and maintain. Simplicity and low cost in setting up make it ideal for home hobbyists. Basic setup consists of a growing tray for plants in containers. Usually used with pebbles, perlite and rockwool gardening mediums. Reservoirs filled with water and hydroponic nutrient solutions are placed under the growing medium. A timer controls the amount of water pumped back into the growing tray. The draining action helps provide a steady flow of oxygen to the plants roots. An overflow drain is installed to regulate water height and avoid overflow.